Clinical Performance and Wear Resistance of Two Nano Ceramic Resin Composite in Class I Cavities
Study Details
Study Description
Brief Summary
in patients with Class I Cavities, will the use of Zenit Nano Ceramic Composite restorations have similar clinical performance to conventional Ceram-X Nano Ceramic Composite restorations, evaluation of restorations will be done at baseline, six, and twelve months using Modified USPHS Ryge criteria.
| Condition or Disease | Intervention/Treatment | Phase |
|---|---|---|
|
N/A |
Detailed Description
The study will be conducted in the clinic of Conservative Dentistry Department, Faculty of Dentistry, Cairo University; the operator in charge samah mohamed bahig, The subjects fulfilling the eligibility criteria of the trial will be selected from the regular attendees at the clinic of Conservative Dentistry Department, Faculty of Dentistry, Cairo University. Patient examination will be done including medical history, dental history, extra-oral examination and intraoral examination. A periapical radiograph will be taken prior to restorative procedures to assess the degree of approximation of caries to pulp, intactness of lamina dura and/or presence of any periapical radiolucency to exclude the case. The field of operation will be isolated with the application of a rubber dam if possible. Otherwise, cotton rolls and the saliva ejector will be used for moisture control. For cavity preparation, local anesthetic (MepecaineL, Alexandria Company, Egypt) solution will be administrated to control patient discomfort during the procedure. The cavities will be prepared by using cylindrical #314 (Komet®, Germany) in a high speed handpiece (Sirona, Germany) rotating at high speed with copious coolant. Remaining soft caries
-if present- will be removed using sharp excavator (Maillefer, Dentsuply, Switzerland).After the cavity preparation is finished, it will be thoroughly air-water cleaned. The bonding system; the Prime and Bond universal adhesive (Dentsply De Trey GmbH, Konstanz, Germany) will be applied according to the following instructions recommended by the manufacturer and rubbed for 20 seconds then blown with a gentle air blow for 5 seconds to evaporate the solvent and then light curing for 10 seconds using LED light curing unit (>700 mW/cm2).The prepared cavities will be restored with Zenit Nano Ceramic Composite (PRESIDENT DENTAL, GmbH, Munich, Germany) will be applied with incremental placement technique (maximum: 2-mm layer). Increments will be light curing for 40 seconds according to manufacturer's instructions. and for the control group cavities will be restored withCeram•X (Dentsply De Trey GmbH, Konstanz, Germany) with incremental placement technique (maximum: 2-mm layer). Increments will be light cured for 20 seconds according to manufacturer's instructions.
Study Design
Arms and Interventions
| Arm | Intervention/Treatment |
|---|---|
| Active Comparator: Zenit Nano Ceramic Composite (PRESIDENT DENTAL, GmbH, Munich, Germany) Zenit Nano Ceramic Composite (PRESIDENT DENTAL, GmbH, Munich, Germany) is the ideal choice for single-tooth restorations, both in the anterior and the posterior region. It has an ultrafine, radiopaque porcelain filler for use in adhesive filling treatment. It can be polished to a high lustrer due to the ultra- fine particle filler, extremely homogeneous restorations can be placed which are easily polished to a high luster. The mechanical properties of a light-cured dental composite material are particularly dependent on its filler content, the type of incorporated fillers and the efficiency of the filler-resin coupling, so high Vickers hardness, compressive strength and flexural strength are recorded refereed to Zenit filler content 83% by weight (70% by volume) and size 0.7 microns |
Other: Ceram•X (Dentsply De Trey GmbH, Konstanz, Germany
The prepared cavities will be restored with Ceram•X (Dentsply De Trey GmbH, Konstanz, Germany) with incremental placement technique (maximum: 2-mm layer). Increments will be light curing for 20 seconds according to manufacturer's instructions.
Other: Zenit Nano Ceramic Composite (PRESIDENT DENTAL, GmbH, Munich, Germany)
The prepared cavities will be restored with Zenit Nano Ceramic Composite (PRESIDENT DENTAL, GmbH, Munich, Germany) with incremental placement technique (maximum: 2-mm layer). Increments will be light curing for 40 seconds according to manufacturer's instructions.
|
| Experimental: Ceram•X (Dentsply De Trey GmbH, Konstanz, Germany) contains organically modified ceramic nanoparticles (2 to 3 nm) and nano-fillers (10 nm) that are combined with conventional glass fillers (mean particle size: 1.1 to 1.5 μm). Nanoparticles and nano-fillers comprise a polysiloxane backbone and have methacrylate groups available for polymerization. According to the manufacturer's data, filler concentration is 76% by weight and 57% by volume. Furthermore, most of the conventional resin matrix is replaced by a matrix full of highly dispersed methacrylate modified polysiloxane particles (2- 3 nm).These nano-ceramic particles are inorganic-organic hybrid particles. Both, nano-ceramic particles and nano- fillers have methacrylate groups available for polymerization. CeramX does not contain triethylene glycol dimethacrylate (TEGDMA) as it was found mutagenic and cytotoxic in vitro |
Other: Ceram•X (Dentsply De Trey GmbH, Konstanz, Germany
The prepared cavities will be restored with Ceram•X (Dentsply De Trey GmbH, Konstanz, Germany) with incremental placement technique (maximum: 2-mm layer). Increments will be light curing for 20 seconds according to manufacturer's instructions.
Other: Zenit Nano Ceramic Composite (PRESIDENT DENTAL, GmbH, Munich, Germany)
The prepared cavities will be restored with Zenit Nano Ceramic Composite (PRESIDENT DENTAL, GmbH, Munich, Germany) with incremental placement technique (maximum: 2-mm layer). Increments will be light curing for 40 seconds according to manufacturer's instructions.
|
Outcome Measures
Primary Outcome Measures
- Anatomic form [24 months]
Bravo: Restoration is under-contoured, without dentin or base exposure Charlie: Restoration is under-contoured, without dentin or base exposure.restoration need replacement.
Secondary Outcome Measures
- Color Match [24 months]
Alfa: Matches tooth. Bravo: Acceptable mismatch. Charlie: Unacceptable mismatch.
- Marginal Discoloration [24 months]
Alfa: No discoloration. Bravo: minor marginal discoloration without staining toward pulp. Charlie: Deep discoloration with staining toward pulp.
- Marginal Adaptation [24 months]
Alfa: Closely adapted, no visible crevice. Bravo: Visible crevice, explorer will penetrate. Charlie: Crevice in which dentin is exposed.
- Secondary Caries [24 months]
Alfa: No active caries present. Bravo: Non-cavitated active caries is present in contact with the restoration. Charlie: Cavitated active caries is present in contact with the restoration.
- Surface Texture [24 months]
Alfa: As smooth as the surrounding enamel. Bravo: Surface rougher than enamel, clinically acceptable. Charlie: Surface unacceptably rough.
- Marginal Integrity [24 months]
Alfa: Restoration adapts closely to the tooth structure Bravo: A visible crevice. Charlie: The explorer penetrates into the crevice.
- Postoperative sensitivity [24 months]
Alfa: No post-operative sensitivity. Bravo: Short term and tolerable post-operative sensitivity. Charlie: Intolerable post-operative sensitivity.
- Amount of Restoration wear. [24 months]
Measuring unit: Microns (Quantitative)
Eligibility Criteria
Criteria
Inclusion Criteria:
-
• Male or female gender.
-
Only co-operative patients approving to participate in the trial.
-
Good oral hygiene.
-
Medically free adult patients.
-
The age range of the patients is 20 to 54 years
-
Vital first and second molars, with Class I lesion.
-
Functioning tooth with presence of an opposing.
-
Healthy periodontium
Exclusion Criteria:
-
Patients with disabilities.
-
Patients having systemic diseases or severe medically compromised.
-
Individuals with full dentures or crowns and bridges in occlusal contact with teeth indicated for the restorative treatment
-
Pregnant or lactating subjects, or intending to become pregnant during the course of the study
-
Poor oral hygiene.
-
Teeth with pulpal pain.
-
Teeth with periapical lesions.
-
Endodontically treated teeth
-
Teeth with mobility.
-
Non-functioning tooth with no opposing tooth.
-
Heavy occlusion or signs of severe attrition.
-
Severe periodontal affection
Contacts and Locations
Locations
No locations specified.Sponsors and Collaborators
- Cairo University
Investigators
None specified.Study Documents (Full-Text)
None provided.More Information
Publications
None provided.- 91120