MIH and Hypersensitivity in Children

Sponsor

Università degli Studi di Brescia (Other)

Overall Status

Recruiting

CT.gov ID

NCT05705037

Collaborator

(none)

Enrollment

Location

Arms

15.6

Anticipated Duration (Months)

2.5

Patients Per Site Per Month

Study Details

Study Description

Brief Summary

The aim of this study was to evaluate the efficacy of the association of casein phosphopeptide plus amorphous calcium phosphate (CPP-ACPF) mousse and photo-bio-modulation therapy (PMBT) (diode laser, RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l.) in the treatment of dental hypersensitivity (DH) in children with Molar Incisor Hypomineralization (MIH) .

Children aged 6-14 years with hypersensitive teeth were randomized into 3 groups. Group A received the application of CPP-ACPF mousse (GC MI Paste®) and sham light therapy; group B got the application of placebo mousse (Elmex Junior®) and PMBT; group C received both CPP-ACPF mousse and PMBT.

Condition or Disease	Intervention/Treatment	Phase
Dentin Sensitivity Molar Incisor Hypomineralization	Other: CPP-ACPF Other: PBMT Other: CPP-ACPF+PBMT	N/A

Detailed Description

Three desensitizing treatment sessions for each group (group A, group B, group C) were performed with a 7 days-interval. The detailed protocol for each treatment is described below.

Group A (CPP-ACPF mousse + sham light therapy) CPP-ACPF mousse (GC MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a sham therapy was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. Although the device was switched on, the hand piece did not work and the sound was emitted by a mobile phone. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown.

Group B (placebo mousse + PBMT) A placebo mousse (Elmex Junior®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2

Group C (CPP-ACPF + PBMT) CPP-ACPF mousse (GC MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2

Study Design

Study Type:

Interventional

Anticipated Enrollment :

39 participants

Allocation:

Randomized

Intervention Model:

Parallel Assignment

Masking:

Double (Participant, Outcomes Assessor)

Primary Purpose:

Treatment

Official Title:

Molar Incisor Hypomineralization and Hypersensitivity in Paediatric Age: a Comparison of Treatment Protocols

Actual Study Start Date :

Jan 10, 2022

Anticipated Primary Completion Date :

Feb 10, 2023

Anticipated Study Completion Date :

May 1, 2023

Arms and Interventions

Arm	Intervention/Treatment
Sham Comparator: Group A (CPP-ACPF mousse + sham light therapy) CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a sham therapy was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. Although the device was switched on, the hand piece did not work and the sound was emitted by a mobile phone. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown.	Other: CPP-ACPF CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a sham therapy was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. Although the device was switched on, the hand piece did not work and the sound was emitted by a mobile phone. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown.
Placebo Comparator: Group B (placebo mousse + PBMT) A placebo mousse (Elmex Junior®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2	Other: PBMT A placebo mousse (Elmex Junior®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2
Experimental: Group C (CPP-ACPF + PBMT) CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2	Other: CPP-ACPF+PBMT CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2.

Arm

Intervention/Treatment

Sham Comparator: Group A (CPP-ACPF mousse + sham light therapy)

CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a sham therapy was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. Although the device was switched on, the hand piece did not work and the sound was emitted by a mobile phone. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown.

Other: CPP-ACPF

Placebo Comparator: Group B (placebo mousse + PBMT)

A placebo mousse (Elmex Junior®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2

Other: PBMT

Experimental: Group C (CPP-ACPF + PBMT)

CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2

Other: CPP-ACPF+PBMT

CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2.

Outcome Measures

Primary Outcome Measures

Treatment of dental hypersensitivity (DH) [12 months]
The efficacy of the treatment of dental hypersensitivity was evaluated using the Visual Analogue Scale (VAS), ranging from 0 to 10, with 0=no pain and 10= worst possible pain. The evaluation was performed at the following time points: before (T0) and after (T1) the first session, after the second session (T2) on the 7th day, after the third session (T3) on the 14th day and after 4 weeks from the starting (T4) on the 28th day.