Microbial Colonisation On Vacuum-Formed Retainers Constructed On Conventional Models And Three Dimensional (3D) Reconstructed Models
Study Details
Study Description
Brief Summary
Vacuum-formed retainers are clear or transparent retainers, that hold the teeth in the new position after active orthodontic treatment. These custom made appliances are becoming popular these days due to the aesthetics value among patients.
Vacuum-formed retainers can be made through a process that softens the clear plastic and vacuumed to follow the shape of the dental model before it cools off and hardens again. These dental models can be made from conventional method or through a 3D reconstruction process. Recently, it was found that there is no difference in terms of stability of the teeth and oral health related quality of life of the patients wearing vacuum-formed retainers constructed on either types of models.
Physically, the surface roughness of the retainers appear different because the conventional models and 3D printed models are constructed in a different manner.
Our interest is to determine whether the difference in surface roughness would affect microbial colonisation which can eventually affect the oral health.
So this study aims to find the association between microbial colonisation and surface roughness of vacuum-formed retainers constructed on conventional models and also 3D reconstructed models.
| Condition or Disease | Intervention/Treatment | Phase |
|---|---|---|
|
N/A |
Detailed Description
RATIONALE OF STUDY
The vacuum-formed retainers are widely preferred today but there is limited research on the effects of the retainers on microbial colonisation, which can have an impact on the oral health. There is possibility that a rough surface finishing of the vacuum-formed retainers may lead to increased microbial colonisation. Therefore, there is a need for us to investigate if the vacuum formed retainers made on 3D reconstructed models may produce increased surface roughness which then can lead to increased microbial colonisation and later impacts the oral health.
Primary Objective :
- To determine the association between different surface roughness of vacuum- formed retainers and microbial colonisation.
Secondary Objectives :
-
To compare the surface roughness of vacuum-formed retainers constructed on conventional models and 3D reconstructed models.
-
To compare the microbial colonisation on vacuum-formed retainers with different roughness as constructed on conventional models and 3D reconstructed models.
-
To compare the microbial colonisation between upper and lower vacuum-formed retainers with different surface roughness.
-
To compare the microbial colonisation on vacuum-formed retainers with different surface roughness between full time wear and part time wear.
SAMPLE SIZE CALCULATION
Sample size calculation is done based on a type 1 error frequency of 5% and the power of the statistical test is set at 80%. This is based on a study done by Farhadian et al, 2016 on Streptococcus colonisation on orthodontic retainers. The total number of participant needed for the trial was 27 with a minimum of 9 participants per group. With an anticipated 20% drop outs, a total number of 36 patients will be recruited.
Methodology
Patients who are currently undergoing fixed appliance treatment at Faculty of Dentistry, University of Malaya will be screened for their progress of treatment and whether they are ready for debond. During screening, patients who fit the inclusion and exclusion criteria will be selected and given a patient information sheet and a detailed explanation of the clinical trial. Voluntarily participant will then be recruited into this study and informed consent will be obtained. A total number of 36 participants will be recruited for this clinical trial.
Participants will be drawing lots to obtain their study number. Then, the orthodontic resident will have to check the group allocation with the orthodontic consultant.
During the first appointment, debond procedure will be done according to the standard protocol. Three sets of impression will be taken for the construction of study model, construction of the standard retainers and also for the research purpose. The standard retainers will then be issued on the same day of debond (T0). Participants will be instructed to wear the retainers full time except during brushing, cleaning of the appliance and during meals.
Participants will be reviewed one week post debond (T1). During this appointment, the standard retainers will be taken and kept by the orthodontic resident. The first interventional retainers will be issued and participants are advised to wear the retainers full time / 24 hours except during meals, brushing and cleaning of the appliance. Participants will be given a new retainer box to keep their retainers as well as a new toothbrush for cleaning their appliance. A pamphlet that contains detailed information on the care of retainers will also be provided to every participant. Participants will be reminded regularly to wear their retainers full time / 24 hours for three months.
Participants will be reviewed again 3 months post debond (T2). During this appointment, the first interventional retainers will be taken and kept by the orthodontic resident. Then the second interventional retainers will be issued and participants are advised to wear the retainers for 10 hours only. Participants will also be given a new retainer box to keep their retainers as well as a new toothbrush for cleaning their appliance. Analysis of the first interventional retainers will then be carried out. Participants will also be reminded regularly to wear their retainers for 10 hours only for 3 months.
Participants will be reviewed again 6 months post debond (T3). During this appointment, the second interventional retainers will be taken and kept by the orthodontic resident. Then the standard retainers will be issued back and participants are advised to continue wearing the retainers for 10 hours only. Analysis of the second interventional retainers will then be carried out.
STATISTICAL ANALYSIS
Statistical Analysis will be done using SPSS software version 21. P < 0.05 will be set as the level of significance.
-
One way analysis of variance (ANOVA) will be used to compare the surface roughness and microbial colonization on vacuum-formed retainers constructed on conventional models and 3D reconstructed models.
-
Paired Sample T-Test will be used to compare the microbial colonization between the upper and lower vacuum-formed retainers with different surface roughness as well as between full time wear and part time wear.
-
Correlation will be used to determine the association between surface roughness of vacuum-formed retainers and microbial colonization.
Study Design
Arms and Interventions
| Arm | Intervention/Treatment |
|---|---|
| Active Comparator: Conventional Vacuum-Formed Retainers Vacuum-formed retainers constructed on conventional stone models. |
Device: Conventional VFR
Conventional retainers
|
| Experimental: Vacuum-Formed Retainers From SLA Vacuum-formed retainers constructed on 3D reconstructed models using stereolitography (SLA) technique. |
Device: VFR from SLA
SLA has better finishing compared to FDM but it is more expensive.
|
| Experimental: Vacuum-Formed Retainers From FDM Vacuum-formed retainers constructed on 3D reconstructed models using fused deposition modeling technique (FDM). |
Device: VFR from FDM
FDM has poorer finishing compared to SLA but it is cheaper.
|
Outcome Measures
Primary Outcome Measures
- Microbial Colonisation On Vacuum-Formed Retainers [6 months]
Microbial colony count on the vacuum-formed retainers constructed on conventional models & 3D reconstructed models. The vacuum-formed retainers that are collected from the patients will be placed in BHI media and then undergo the process of sonication, which will produce the bacteria suspension. This bacteria suspension will then be cultured in an agar plate with BHI media and incubated for 18 - 24 hours. The total colony per count will then be counted and recorded.
Secondary Outcome Measures
- Surface Roughness Of Vacuum-Formed Retainers [6 months]
Surface roughness values of vacuum-formed retainers constructed on conventional models & 3D reconstructed models. The surface roughness of the vacuum-formed retainers will be measured using Alicona 3D Surface Management System. Vacuum-formed retainers which are new and used by patient (after disinfection) will be placed for surface roughness assessment under the microscope and the value which is measured as Ra (profile roughness parameter) will be recorded.
Other Outcome Measures
- Patient's Compliance In Wearing Vacuum-Formed Retainers [6 months]
Patients's compliance in wearing vacuum-formed retainers as instructed. Patient's compliance will be measured using a global rating scale that asked if they wore the VFR 24 hours or 10 hours per day as instructed. If the patient admitted to wear the retainers more than 24 hours or 10 hours daily as instructed, the patient is considered to be compliant.
Eligibility Criteria
Criteria
Inclusion Criteria:
- Fixed appliance on upper and lower arches ii. About to debond iii. Planned for vacuum-formed retainers for retention iv. Non smoking patients v. No systemic disease
Exclusion Criteria:
- Undergoing sectional fixed appliance / single arch treatment ii. Indicated for double retention regime with bonded retainers iii. Patient with smoking habit iv. Any systemic disease that may affect the salivary flow v. History of use of antimicrobial mouthwash less than 1 month prior to debond
Contacts and Locations
Locations
| Site | City | State | Country | Postal Code | |
|---|---|---|---|---|---|
| 1 | Postgraduate Orthodontic Clinic, Faculty Of Dentistry, University Of Malaya | Kuala Lumpur | Malaysia | 50603 |
Sponsors and Collaborators
- University of Malaya
Investigators
None specified.Study Documents (Full-Text)
None provided.More Information
Publications
- Dawes C, Watanabe S, Biglow-Lecomte P, Dibdin GH. Estimation of the velocity of the salivary film at some different locations in the mouth. J Dent Res. 1989 Nov;68(11):1479-82.
- Dawes C. Salivary flow patterns and the health of hard and soft oral tissues. J Am Dent Assoc. 2008 May;139 Suppl:18S-24S. Review.
- Dietrich CA, Ender A, Baumgartner S, Mehl A. A validation study of reconstructed rapid prototyping models produced by two technologies. Angle Orthod. 2017 Sep;87(5):782-787. doi: 10.2319/01091-727.1. Epub 2017 May 1.
- Hazeveld A, Huddleston Slater JJ, Ren Y. Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniques. Am J Orthod Dentofacial Orthop. 2014 Jan;145(1):108-15. doi: 10.1016/j.ajodo.2013.05.011.
- Hibino K, Wong RW, Hägg U, Samaranayake LP. The effects of orthodontic appliances on Candida in the human mouth. Int J Paediatr Dent. 2009 Sep;19(5):301-8. doi: 10.1111/j.1365-263X.2009.00988.x. Epub 2009 Apr 16. Review.
- Hichens L, Rowland H, Williams A, Hollinghurst S, Ewings P, Clark S, Ireland A, Sandy J. Cost-effectiveness and patient satisfaction: Hawley and vacuum-formed retainers. Eur J Orthod. 2007 Aug;29(4):372-8.
- Kasparova M, Grafova L, Dvorak P, Dostalova T, Prochazka A, Eliasova H, Prusa J, Kakawand S. Possibility of reconstruction of dental plaster cast from 3D digital study models. Biomed Eng Online. 2013 May 31;12:49. doi: 10.1186/1475-925X-12-49.
- Keating AP, Knox J, Bibb R, Zhurov AI. A comparison of plaster, digital and reconstructed study model accuracy. J Orthod. 2008 Sep;35(3):191-201; discussion 175. doi: 10.1179/146531207225022626.
- Kim GB, Lee S, Kim H, Yang DH, Kim YH, Kyung YS, Kim CS, Choi SH, Kim BJ, Ha H, Kwon SU, Kim N. Three-Dimensional Printing: Basic Principles and Applications in Medicine and Radiology. Korean J Radiol. 2016 Mar-Apr;17(2):182-97. doi: 10.3348/kjr.2016.17.2.182. Epub 2016 Mar 2. Review.
- Low B, Lee W, Seneviratne CJ, Samaranayake LP, Hägg U. Ultrastructure and morphology of biofilms on thermoplastic orthodontic appliances in 'fast' and 'slow' plaque formers. Eur J Orthod. 2011 Oct;33(5):577-83. doi: 10.1093/ejo/cjq126. Epub 2010 Dec 27.
- Mamai-Homata E, Koletsi-Kounari H, Margaritis V. Gender differences in oral health status and behavior of Greek dental students: A meta-analysis of 1981, 2000, and 2010 data. J Int Soc Prev Community Dent. 2016 Jan-Feb;6(1):60-8. doi: 10.4103/2231-0762.175411.
- Marsh PD. The role of microbiology in models of dental caries. Adv Dent Res. 1995 Nov;9(3):244-54; discussion 255-69. Review.
- Quirynen M, Marechal M, Busscher HJ, Weerkamp AH, Darius PL, van Steenberghe D. The influence of surface free energy and surface roughness on early plaque formation. An in vivo study in man. J Clin Periodontol. 1990 Mar;17(3):138-44.
- Thickett E, Power S. A randomized clinical trial of thermoplastic retainer wear. Eur J Orthod. 2010 Feb;32(1):1-5. doi: 10.1093/ejo/cjp061. Epub 2009 Oct 14.
- Türköz C, Canigür Bavbek N, Kale Varlik S, Akça G. Influence of thermoplastic retainers on Streptococcus mutans and Lactobacillus adhesion. Am J Orthod Dentofacial Orthop. 2012 May;141(5):598-603. doi: 10.1016/j.ajodo.2011.11.021.
- Wan Hassan WN, Yusoff Y, Mardi NA. Comparison of reconstructed rapid prototyping models produced by 3-dimensional printing and conventional stone models with different degrees of crowding. Am J Orthod Dentofacial Orthop. 2017 Jan;151(1):209-218. doi: 10.1016/j.ajodo.2016.08.019.
- Yitschaky O, Katorza A, Zini A, Yitschaky M, Zadik Y. Acrylic orthodontic retainer is not a risk factor for focal Candida colonization in young healthy patients: a pilot study. Oral Surg Oral Med Oral Pathol Oral Radiol. 2016 Jan;121(1):39-42. doi: 10.1016/j.oooo.2015.10.001. Epub 2015 Oct 22.
- DGD_170002